Java 6 Update 23 64 Bit

Coffee half-dozen Update 14 32-flake (besides known as Java Runtime Environment (JRE) version 1.6.0_14) is a prerequisite for running SAS 9.two under Microsoft Windows vii. For Microsoft Windows Server 2008 R2, the Java 6 Update 23 32-bit is required.

Note: Java 5 is not supported under Windows vii or Windows Server 2008 R2.

Errors

When JRE one.5 is used with SAS 9.ii, errors or problems might occur:

The following error occurs in the bootstrap.log file:

An unexpected error has been detected by HotSpot Virtual Motorcar: EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x75c1aae8, pid=324,tid=1788 Java VM: Java HotSpot(TM) Client VM (one.5.0_12-b04 mixed  mode) Problematic frame:  C  [KERNELBASE.dll+0xaae8]

The following error occurs in the sdw.log file:

Side-by-side installation of 32-bit and 64-t SAS is non  supported at this time. Please remove the installed SAS Foundation before installing this version.

SAS Java programs such equally SAS^® 9.2 Management Console or SAS^® ix.2 Personal Login Manager do not open up.
The following Install Failure dialog box appears when you install Java Platform, Standard Edition Runtime Surround:

When you select File ► Open in any Java awarding, the buttons do non appear on the toolbar in Windows 7.

This note presents divide trouble resolutions for 2 operating systems. Click on the link for the advisable operating arrangement.

Windows vii
Windows Server 2008 R2

Trouble Resolution for Windows 7

If you encounter the issues above, for the Windows 7 operating arrangement, you must install the Sun 32-bit JRE ane.six.0_14, even though your car is 64-chip. Also note that you must install this JRE before you run the SAS^® Deployment Wizard.

Notation: Data nigh SAS ix.two (TS2M3) back up for JREs is available from the "SAS 9.2 (TS2M3) Support for Java Runtime Environments."

Perform the following steps to install these JREs:

Click here to get to the Oracle Sun Developer Network page.
From the Java SE Runtime Environment 6u14 screen, select Accept License Agreement and and so click jre-6u14-windows-i586.exe.

Annotation: Do not click jre-6u14-windows-x64.exe or jre-6u14-windows-ia64.exe. These are 64-bit versions, which are not supported with the SAS installation.
If you are already registered on the Oracle Web site, the File Download - Security Warning dialog box appears. If yous have not registered yet, you might exist required to annals at this indicate earlier you can continue.

Click Run.
The Internet Explorer - Security Warning dialog box appears.

Click Run.
The Java Setup - Welcome dialog box appears.
Click Install.
The Java Setup Progress window appears.

The Java Setup - Consummate dialog box appears.
Click Close.
Ensure that all SAS processes and services are airtight. Bank check in Task Manager and in Services for any such processes and services:

For Task Manager: Printing CTRL+ALT+DELETE and click Task Manager.
For Services: Click Start ► Run and type services.msc in the Open field.

If y'all attempted previously to install SAS 9.two with the incorrect JRE version, you lot demand to change the sassw.config file to point to the correct JRE path (for example, JREHOME=C:\Program Files (x86)\Java\jre6\bin\coffee.exe ).
Annotation: If you utilise the FORCEJREPROMPT option, the sassw.config file is not updated. Retrieve to modify manually the sassw.config file in the !SASHOME directory to include the new JRE path. The default location for the sassw.config is C:\Program Files\SAS\sassw.config . Come across "Reconfiguring the Standard SAS Application Launcher."
Install SAS 9.ii software.

From your desktop, click Start ► Run ► Scan.
Highlight setup.exe and click Open.
In the path after setup.exe, blazon -forcejreprompt equally shown in the following example:
"c:\sas software depot\setup.exe" -forcejreprompt

The SAS Deployment Magician: Select Java Runtime Environment folio appears.

Exisiting JRE button

Click the Select an existing Coffee Runtime Surroundings button.

For more information about which SAS products that are beingness installed require a JRE, click the View Data About Supported Java Runtime Environment Versions link on this page or go to "SAS 9.2 (TS2M3) Support for Java Runtime Environments."

The SAS Deployment Magician: Select Java Runtime Environment page appears.

Browse button

Click Browse.

A file proper name choice box appears.

JRE Path text box

Navigate to the JRE directory such every bit C:\Program Files (x86)\Java\jre6) and specify the path to the 32-bit one.vi JRE file.
Click Open.

Another SAS Deployment Wizard: Select Java Runtime Surround page appears.

Verify path for JRE

Select Select an existing Coffee Runtime Environment.
Verify that the path that is displayed is correct.
Click Adjacent.

A dialog box appears, which prompts yous to either accept or override the default selections.

image label

Click Aye to go on and override the default choice.

In revision 10w42, the pick to install the Recommended JRE is no longer available during the installation for Windows 7 or for the Windows Server 2008 R2 operating systems. The only selection is Select an Existing Java Runtime Surround. On the same screen, click View data about supported Java Runtime Environment Versions. This takes you to the "SAS nine.2 (TS2M3) Back up for Java Runtime Environments" page with the links to the recommended JRE for your operating arrangement.

Additional Information and Resource

Prior to SAS 9.2, Rev. 09w51, JRE 1.6 was not supported. In order to use JRE one.half dozen, you need to install SAS nine.ii revision 09w51 or subsequently. In your SAS Software Order email, expect for Product: SAS 9.2, Rev. 920_09w51 or afterwards in order to use JRE 1.6.

For more information about installing or upgrading to a newer version of JRE, come across the following resources:

"Irresolute the Java Runtime Environment" in the SAS^® Deployment Magician User's Guide
"Specify a Different JRE" in the SAS^® 9.ii Intelligence Platform: Installation and Configuration Guide
"Configuring SAS 9.two to Use an Alternative Java Runtime Surroundings or Java Development Kit"
SAS Note 34569, "SAS^® 9.1.3 Service Pack 4 and SAS^® 9.2 support for the Microsoft Windows 7 operating organization"
SAS Note 36616, "SAS^® ix.1.iii Service Pack 4 and SAS^® 9.2 support for the Microsoft Windows Server 2008"

Problem Resolution for Windows Server 2008 R2

If you encounter the problems above, for the Windows Server 2008 R2 operating system, you lot must install the Sun 32-fleck JRE 1.half-dozen.0_23, even though your auto is 64-bit. Also note that you must install this JRE earlier y'all run the SAS^® Deployment Wizard.

Note: Information about SAS ix.2 (TS2M3) support for JREs is available from "SAS 9.2 (TS2M3) Back up for Java Runtime Environments."

Perform the post-obit steps to install these JREs:

Click here to get to the Oracle Dominicus Developer Network folio.
From the Java SE Runtime Surround 6u23 screen, select Accept License Agreement and then click jre-6u23-windows-i586.exe.

Note: Do not click jre-6u23-windows-x64.exe or jre-6u23-windows-ia64.exe. These are 64-bit versions, which are not supported with the SAS installation.
If you are already registered on the Oracle Web site, the File Download - Security Warning dialog box appears. If y'all have not registered yet, you might be required to register at this signal earlier you lot tin continue.

Click Run.
The Internet Explorer - Security Alert dialog box appears.

Click Run.
The Coffee Setup - Welcome dialog box appears.
Click Install.
The Java Setup Progress Wizard window appears.

The Java Setup - Complete dialog box appears.
Click Close.
Ensure that all SAS processes and services are closed. Check in Task Director and in Services for any such processes and services:

For Job Manager: Press CTRL+ALT+DELETE and click Job Manager.
For Services: Click Offset ► Run and type services.msc in the Open up field.

If you attempted previously to install SAS 9.ii with the incorrect JRE version, yous need to modify the sassw.config file to indicate to the right JRE path. For instance: JREHOME=C:\Program Files (x86)\Java\jre6\bin\java.exe
Note: If you use the FORCEJREPROMPT option, the sassw.config file is not updated. Remember to modify manually the sassw.config file in the !SASHOME directory to include the new JRE path. The default location for the sassw.config is C:\Program Files\SAS\sassw.config . See "Reconfiguring the Standard SAS Application Launcher."
Install SAS 9.2 software.
1. From your desktop, click Showtime ► Run ► Scan.
2. Highlight setup.exe and click Open.
3. In the path after setup.exe, type -forcejreprompt as shown in the following case:
  "c:\sas software depot\setup.exe" -forcejreprompt
  
  The SAS Deployment Wizard: Select Java Runtime Surroundings page appears.
4. Select Select an existing Coffee Runtime Environment.
5. Click Browse.
  A file proper noun selection box appears.
6. Navigate to the JRE directory such equally C:\Program Files (x86)\Coffee\jre6) and specify the path to the 32-bit 1.6 JRE file.
7. Click Open.
  Some other SAS Deployment Wizard: Select Java Runtime Surroundings folio appears.
8. Select Select an existing Java Runtime Environment.
9. Verify that the path that is displayed is correct.
10. Click Side by side.

In revision 10w42, the pick to install the Recommended JRE is no longer available during the installation for Windows 7 or for the Windows Server 2008 R2 operating systems. The only choice is Select an Existing Java Runtime Environment. On the same screen, click View information about supported Java Runtime Surroundings Versions. This takes you to the "SAS ix.2 (TS2M3) Support for Coffee Runtime Environments" page with the links to the recommended JRE for your operating system.

Additional Information and Resource

Prior to SAS 9.2, Rev. 09w51, JRE 1.6 was not supported. In lodge to use JRE one.vi, you demand to install SAS 9.2 revision 09w51 or afterwards. In your SAS Software Order east-mail service, look for Product: SAS 9.2, Rev. 920_09w51 or later on in order to use JRE ane.6.

For more information about installing or upgrading to a newer version of JRE, see the post-obit resources:

"Changing the Java Runtime Environment" in the SAS^® Deployment Wizard User's Guide
"Specify a Different JRE" in the SAS^® 9.2 Intelligence Platform: Installation and Configuration Guide
"Configuring SAS nine.2 to Use an Culling Java Runtime Environment or Coffee Development Kit"
SAS Note 34569, "SAS^® ix.i.3 Service Pack iv and SAS^® 9.two back up for the Microsoft Windows seven operating system"
SAS Note 36616, "SAS^® 9.ane.iii Service Pack four and SAS^® 9.two back up for the Microsoft Windows Server 2008"

Operating System and Release Information

Product Family	Product	System	Production Release		SAS Release
Product Family	Product	System	Reported	Stock-still*	Reported	Fixed*
SAS System	Base SAS	Windows 7 Enterprise 32 bit	nine.21_M3
		Windows vii Enterprise x64	9.21_M3
		Windows seven Home Premium 32 bit	9.21_M3
		Windows 7 Home Premium x64	9.21_M3
		Windows 7 Professional person 32 bit	9.21_M3
		Windows vii Professional x64	9.21_M3
		Windows 7 Ultimate 32 bit	ix.21_M3
		Windows vii Ultimate x64	nine.21_M3

* For software releases that are not nonetheless generally available, the Fixed Release is the software release in which the trouble is planned to exist stock-still.

You must utilize the 32-bit version, even if you are installing on an x64 car. This SAS note explains the typical error messages that occur if you use the incorrect JRE with SAS nine.2 and provides resolutions for the error letters.

Type:	Trouble Note
Priority:	warning

Date Modified:	2011-03-15 xv:53:14
Date Created:	2010-08-03 09:31:09